Process Dust Removal In Die Casting Industry

Product Detail

The cyclone dust collector is composed of an air inlet pipe, an exhaust pipe, cylinder, cone and ash composition. The cyclone dust collector is simple in structure, easy to manufacture, install and maintain the management, equipment investment and operation cost are low, and it has been widely used in the separation of solid and liquid particles from the air stream, or from the liquid to separate solid particles. Under normal operating conditions, the centrifugal force acting on the particle is 5 ~ 2500 times of gravity, so the efficiency of the cyclone is significantly higher than that of the gravity settling chamber. Using this principle, a cyclone dust removal device with more than ninety percent dust removal efficiency was successfully developed. In the mechanical type dust collector, the cyclone type dust collector is one of the most efficient. It is used for non viscous and non fibrous dust removal, mostly used for removal of the particles of 5 mu m or more, on 3 m particles of parallel multi cyclone dust collector is 80 ~ 85% of the dust removal efficiency. A cyclone dust collector with high temperature, corrosion resistance, corrosion and special metal or ceramic material is used, which can be operated under the condition of 1000 x 105Pa at temperatures up to 500. From the aspects of technology and economy, the pressure loss of cyclone dust collector is generally 500 ~ 2000Pa. Therefore, it belongs to the medium efficiency dust collector, and can be used for the purification of high temperature flue gas. It is widely used as a dust collector, and it should be used in the boiler flue gas dust removal, multi-stage dust removal and dust removal. Its main drawback is that the removal efficiency of fine dust particles (<5 m) is lower.